[Lowfer] WD2XNS mid day WOLF mode transmission

lloyd chastant lloydc6 at gmail.com
Sun Jan 5 10:59:15 EST 2014


Doug Another way to try is set recr to 136.00 USB
and then under Wolf congif(see JPG attached ) set your sample rate..and
under center freq..800hz..Freq tolerence..1.0 and i use number of
frames..32 and then when you are running should look something like this

2014-01-05 15:33:03 >WOLF10  -r 8001.425 -f 800 -t 1.0 -w 0.0000
t:  24 f: 0.826 a:-0.9 dp: 45.3 ci:12 cj:  1 WKCU33UJY U6VWW ?
t:  48 f: 0.832 a:-1.2 dp: 45.6 ci:11 cj: 68 MAZXEQ/.9.QQHZG -
t:  96 f: 0.689 a:-1.4 dp: 46.3 ci: 8 cj:  6 13S*02K/6/ZX552 ?
t: 192 f: 0.996 pm:1.362 jm:634 q:-13.1 -8.3 PU4A6D1M641BYYP ?
t: 288 f: 0.000 pm:2.860 jm:426 q: -7.8 -4.4 WD2XNS 1.0 W TX -
t: 384 f: 0.000 pm:3.591 jm:426 q: -4.6 -3.0 WD2XNS 1.0 W TX -
t: 480 f: 0.000 pm:3.975 jm:425 q: -3.4 -2.4 WD2XNS 1.0 W TX -

The really critical thing though is your correct sample rate
Just a thought to try
lloyd W3NF


On Sun, Jan 5, 2014 at 3:29 PM, Douglas D. Williams <kb4oer at gmail.com>wrote:

> Ok, trying again with the Wolf frequency tolerance set wider.
>
>
> On Sun, Jan 5, 2014 at 10:24 AM, <jrusgrove at comcast.net> wrote:
>
> > Have to leave for a few hours ... in case there is further interest in
> > WOLF decoding WD2XNS is transmitting on 136.800 kHz for the next several
> > hours.
> >
> >
> > Jay W1VD  WD2XNS  WE2XGR/2  WG2XRS/2
> > ______________________________________________________________
> > Lowfer mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Lowfer at mailman.qth.net
> > Post must be less than 50KB total for message plus attachment!
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wolf.jpg
Type: image/jpeg
Size: 27199 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/lowfer/attachments/20140105/c30c7759/attachment.jpg>


More information about the Lowfer mailing list