[Lowfer] WD2XNS mid day WOLF mode transmission

[Douglas D. Williams]

Jay and others, ok I guess it wasn't the narrow filter then. That just
leaves the sound card, since I know I can copy your signals with QRSS and
WSPR.

Don't bother transmitting on my account. I'll need to get my sound card
properly calibrated before I try again.

Thanks, Doug.


On Sun, Jan 5, 2014 at 9:27 AM, <jrusgrove at comcast.net> wrote:

> Doug
>
> I've received WOLF routinely using a 300 Hz filter so don't think that's
> it. If you have the WOLF Frequency Tolerance setting set wide enough to
> account for your frequency uncertainty and the Center Frequency set to
> match your BFO frequency then there's not much else it could be other than
> sound card sampling rate error. I recall seeing a discussion last year on
> here with bogus information about sound card sampling calibration. Didn't
> follow the thread so don't know if the misinformation was dispelled or not.
>
> I can transmit a WOLF signal again today for a couple hours if you want to
> fool around with it.
>
> Jay
>
>
> ----- Original Message ----- From: "Douglas D. Williams" <kb4oer at gmail.com
> >
> To: "Discussion of the Lowfer (US, European,& UK) and MedFer bands" <
> lowfer at mailman.qth.net>
> Sent: Sunday, January 05, 2014 8:33 AM
>
> Subject: Re: [Lowfer] WD2XNS mid day WOLF mode transmission
>
>
>  I wonder if Andy and I were using filters that were too narrow?
>>
>> I had my receiver in CW mode, centered on 136.8 kHz, with a 500Hz filter.
>>
>> Probably should have used a 1kHz filter now that I think about it....
>>
>>
>>
>>
>> On Sat, Jan 4, 2014 at 8:00 PM, Andy - KU4XR <ku4xr at yahoo.com> wrote:
>>
>>  Par for the course on my end... NADA...
>>>
>>> TV's are now on, night-time static has set in, the S-meter is 2-1/2
>>> S-units
>>> higher than when I left to go out for awhile at 4:30 pm local time..
>>>
>>> Have a good night everyone:
>>>
>>> Andy - KU4XR
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>  ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>