[Lowfer] WD2XNS OP32 / OPDS32

[Garry]

Jay, thanks for the strong signal to try opds again. Didn't do too well. 
On the XP machine (k3siw-1), the FFT shows your signal strong and steady 
but couldn't get any detections, although regular opera detected you 
fine later. On the Win7 machine (k3siw-2), I have to run opds inside a 
virtual machine but that seemed to work okay. However, the 
frequency-spread numbers were often quite large and the snr jumped all 
over the place (even though visually the FFT display of your peak was 
steady, as was the noise floor). This machine had enough horsepower to 
run regular opera simultaneously and the snr readings with a loop were 
generally a dB or two less than with the eprobe on k3siw-1. Hope some 
day running the opds code is simple and reliable/repeatable.

2014-01-04 04:43:57 WD2XNS 1268km 137552.940Hz 29mHz-38.2dBOp 85% 18.4dB
2014-01-04 04:11:08 WD2XNS 1268km 137552.940Hz149mHz-38.2dBOp 94% 19.8dB
2014-01-04 03:38:23 WD2XNS 1268km 137552.947Hz151mHz-40.3dBOp100% 20.5dB
2014-01-04 03:05:37 WD2XNS 1268km 137552.945Hz 5mHz -40.2dBOp 96% 19.9dB
2014-01-04 02:32:51 WD2XNS 1268km 137552.945Hz 10mHz-38.5dBOp 88% 19.9dB
2014-01-04 02:00:04 WD2XNS 1268km 137552.945Hz 11mHz-21.2dBOp 97% 17.7dB
2014-01-04 01:27:17 WD2XNS 1268km 137552.939Hz 5mHz-27.6dBOp 100% 18.9dB
2014-01-04 00:54:32 WD2XNS 1268km 137552.938Hz146mHz-38.9dBOp 93% 19.3dB

-- 
Garry, K3SIW, EN52ta, Elgin, IL