[Lowfer] 74.324.5 WG2XLP

Jay Hainline ka9cfd at mtcnow.net
Wed Feb 26 21:33:08 EST 2014


I have the grabber running on 74 KHz but only see Bob on so far.

http://lwca.org/grabbers/ka9cfd/

Jay Hainline KA9CFD
Colchester, IL EN40om

-----Original Message----- 
From: Pat Bunn
Sent: Thursday, February 27, 2014 02:27
To: <k3siw at sbcglobal.net> ; Discussion of the Lowfer(US, European, &amp; UK) 
and MedFer bands
Subject: Re: [Lowfer] 74.324.5 WG2XLP

Thanks for the effort . It is pretty noisy here. Hopefully I can work to get 
out a better signal with some additional work. Output power is about 400 
watts. I am disappointed in my 74 KHz results so far. Thanks again Garry.

Pat

Sent from my iPhone

On Feb 26, 2014, at 9:21 PM, Garry Hess <k3siw at sbcglobal.net> wrote:

> Pat, I narrowed down the ARGO bandwidth to rate QRSS60 and do see bits of 
> signal from you on 74.3245 kHz. Very cold here but noisy from the South so 
> will do better when/if things quiet down.
> -- 
> 73, Garry, K3SIW, EN52ta, Elgin, IL
> <capt060_slow_sdr-iq1_eprobe2_00000_crop.jpg>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 



More information about the Lowfer mailing list