[Lowfer] WE2XGR/2 /3 WSQ2 mode

[Charlie , W5COV]

Well that was quick enough to download , now to read the manual :)

Already had the receiver on 474.2 USB watching WSPR.

Will leave this running while I read the manual and keep the receiver on 
all evening.

Charlie, W5COV

On 2/11/2014 5:13 PM, jrusgrove at comcast.net wrote:
> WE2XGR/2 and WE2XGR/3 will be running tests in WSQ2 mode tonight. 
> WE2XGR/2 is currently transmitting WSQ2 at reduced power on 474.2 kHz 
> (dial) +1000 Hz. Reports are appreciated. Please advise if the 
> frequency choice causes problems.
>
> This new mode is similar to Jason but is faster (than Jason 'normal' 
> speed) and is designed for two way communications as opposed to a 
> beacon only mode. Sensitivity is reported to be about -25 dB 
> referenced to an SSB bandwidth.
>
> Details and program download available at 
> http://www.qsl.net/zl1bpu/SOFT/WSQ.htm .
>
> Jay W1VD  WD2XNS  WE2XGR/2  WG2XRS/2
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>