[Lowfer] KU4XR Tree-Tenna Note-1

[jrusgrove at comcast.net]

Run coax out to the tree, install the usual ground rod, isolation transformer and/or common mode 
choke and match the 'tree antenna' to the coax impedance. Then see how it performs in relation to 
other antennas.

Jay W1VD  WD2XNS  WE2XGR/2  WG2XRS/2




----- Original Message ----- 
From: "John Gibbs" <jgibbs at telus.net>
To: <lowfer at mailman.qth.net>
Sent: Monday, February 03, 2014 5:55 PM
Subject: Re: [Lowfer] KU4XR Tree-Tenna Note-1


> Andy... what if you remove the wire from the tree and attach it to a ground stake near the tree.. 
> maybe the same results would happen :-)
>
>
> John  /  VE7BDQ
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html