[Lowfer] Running WG2XCT CW beacon on 471.80 KHz all weekend
Pat Bunn
pbunn at matrixei.com
Mon Apr 28 21:14:38 EDT 2014
Running the transmitter at full power tonight on 471.80 KHz CW beacon All reports are appreciated
Pat
WH2XCT
Sent from my iPhone
On Apr 27, 2014, at 12:43 PM, Pat Bunn <pbunn at matrixei.com> wrote:
> Thanks for the captures and reports. I may crank it up late tonight or tomorrow night to 1 KW and test the transmitter at full design output for a few hours and then get back to some weak signal work.
>
> Pat
>
> Sent from my iPhone
>
> On Apr 27, 2014, at 12:33 PM, Michael Sapp <wa3tts at verizon.net> wrote:
>
>>
>> Pat: After midnight your 471.8 kHz signal was moving the S-meter along with the background QRN crashes last nite to about S2~S3 at times with the RX pre-amp on. Rapid fade/recover on CW characters continued.
>>
>> http://i1296.photobucket.com/albums/ag19/wa3tts/capt00004_zpsa6f6d14f.jpg This capture made with rx preamp off.
>>
>> That being the case you could likely turn the power down 30dB (or more) for a solid QRSS60 capture over the 400mi path.
>>
>> 195 degree heading to EM94bw about 35 degrees off the main heading of my SW EWE pattern, perhaps 1 dB or so down from it's
>>
>> 230 degree main heading in EN90xn. Output of my ZLW-1 mixer & OCXO converter was split at the time to also copy WSPR2 on a second receiver.
>>
>>
>> Woke up briefly around 1100Z and your signal was just copyable by ear with narrow filters.
>>
>> Tnx for the beaconing. 73, Mike wa3tts
>>
>>
>>
>>
>> ----- Original Message ----- From: "Pat Bunn" <pbunn at matrixei.com>
>> To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" <lowfer at mailman.qth.net>
>> Sent: Sunday, April 27, 2014 8:42 AM
>> Subject: Re: [Lowfer] Running WG2XCT CW beacon on 471.80 KHz all weekend
>>
>>
>>> Michael
>>>
>>> Thanks for the capture and report.
>>>
>>> Pat
>>> WG2XCT
>>>
>>> Sent from my iPhone
>>>
>>> On Apr 26, 2014, at 11:01 PM, N8OOU <n8oou at meekfarm.us> wrote:
>>>
>>>> Argo captures of 471.8 received by my kenwood ts-480 and 5 band trap vertical. Early evening nothing was audible or visible in argo at qrss3
>>>> After local sunset argo started showing a line but again nothing audible. At 02:24 utc the signal strength improved as shown in the capture. Was able to decode the cw id by ear, and a switch to cw/ndb mode in argo.
>>>>
>>>> Good Luck N8OOU M.Meek
>>>> On 04/26/2014 09:58 AM, Pat Bunn wrote:
>>>>> Running CW beacon at about 400 watts all weekend letting transmitter burn in. 471.8 KHz CW. All reports appreciated especially ground wave.
>>>>>
>>>>> Pat
>>>>> WG2XCTo
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>> --
>>>> 73 de N8OOU - Mike Meek
>>>>
>>>> <argo47180006.jpg>
>>>> <argo47180009.jpg>
>>>> ______________________________________________________________
>>>> Lowfer mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Lowfer at mailman.qth.net
>>>> Post must be less than 50KB total for message plus attachment!
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Lowfer
mailing list