[Lowfer] Trying QRSS30 on 160 tonite

[Michael Sapp]

Andy: I had to go to 40dB pad to run QRSS30 normal and the 160m loading coil 
is switched out of my HF vertical.....

http://i1296.photobucket.com/albums/ag19/wa3tts/IMG_3730_zpsccb82e8e.jpg

Capture is on, I can send you some files tomorrow....

73,  Mike wa3tts



----- Original Message ----- 
From: "KU4XR" <ku4xrradio at gmail.com>
To: "Discussion of the Lowfer (US, European, &amp, UK) and MedFer bands" 
<lowfer at mailman.qth.net>
Sent: Friday, April 11, 2014 11:39 PM
Subject: Re: [Lowfer] Trying QRSS30 on 160 tonite


> Thanks for the reply Mike.. The original post was by accident of
> course.. There is a possibility that RF is getting into my audio line
> since I am keying by VOX, and I had
> the top case off the rig too.. I have put it back on to add the
> shielding.. If that doesn't make a difference, I'll try dropping the
> power..
>
> KU4XR
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html