[Lowfer] Trying QRSS30 on 160 tonite

[Michael Sapp]

Andy:  This is the "other" Mike in EN90xn.  Very audible here on 160m. 
Spectran shows your signal 30 dB out of the noise in
an 1800Hz InRad xtal filter in real time---which is way too hot for ARGO. 
If you can turn your power down 20~30 dB
it would make for a better QRSS test signal or perhaps try in daylight when 
the absoprtion is higher....

http://i1296.photobucket.com/albums/ag19/wa3tts/IMG_3729_zps4be89d95.jpg

about 1.810780, my FT-847 does not have a high stability master osc (yet).

73 Mike wa3tts

----- Original Message ----- 
From: "Andy - KU4XR" <ku4xr at yahoo.com>
To: " European & UK) and MedFer bandsDiscussion of the Lowfer (US" 
<lowfer at mailman.qth.net>
Sent: Friday, April 11, 2014 10:23 PM
Subject: Re: [Lowfer] Trying QRSS30 on 160 tonite


> Mike:
>
> I don't want to be a pest, but if you can, will you look at my signal 
> again tonite ??
> I am keying a different way in QRSS-30.. The frequency might be off a 
> little bit,
> I don't know for sure.. The main thing I want to see is a flat carrier 
> line again..
> Not fat, and fluffy.. Thanks, and 73 to you :
>
> Andy - KU4XR
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html