[Lowfer] WSPR 15 tonite on 73.0 Dial Freq 74.550 Tx Freq.

[Jay Hainline]

Garry, done the same thing here. Turned CAT off and have the radio tuned to 
72.930 and listening at 1620 hz audio. First decode was at -33 here on the 
LF Engineering probe. Waiting on the 2nd decode to get the full callsign.

73 Jay KA9CFD EN40om

-----Original Message----- 
From: Garry Hess
Sent: September 27, 2013 19:46
To: lowfer list
Subject: Re: [Lowfer] WSPR 15 tonite on 73.0 Dial Freq 74.550 Tx Freq.

Bob,

Boy, I'm really rusty from last winter. Finally see your signal in the
proper 25 Hz wspr15 window. My sound card is far from the nominal 11025
Hz and I don't know of a way to change that. So, I have my tuning set to
72.940 kHz to put your signal at about 1610 Hz audio. The correlation
peak is plenty potent so hopefully at the end of this 15 minute TX
window I'll have a decode. Yes, it just came through:

0030  -23   0.1    0.074610    0   <...>         FN12LQ   40

No callsign but perhaps that's like the extended version of wspr that
takes 2 decodes to register the longer calls.
-- 
73, Garry, K3SIW, EN52ta, Elgin, IL