[Lowfer] MP & W1VD cal

[Michael Sapp]

Yes Mitch, you went low as Garry confirmed. I saw that as well. For a moment 
there I thought I was sideband-inverted, but Garry's comment assurred me 
that
ARGO was working OK.  If there is a way to get something backwards, I 
usually succeed at it.....:)

Mike tts

----- Original Message ----- 
From: "Mitch Powell" <mitch.powell at sympatico.ca>
To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
<lowfer at mailman.qth.net>
Sent: Friday, September 27, 2013 7:54 PM
Subject: Re: [Lowfer] MP & W1VD cal


> Thanks Mike - looks like I definitely am transmitting low - though my ARGO 
> shows high.
> I better do some calibration.
> My DDS is tuning backwards ??
> Mitch
> On 2013-09-27, at 7:06 PM, Michael Sapp wrote:
>
>> Jay wrote:
>>
>> Mitch
>>
>>
>>
>> the first signal being me tweaking to 500.00 Hz on the 100kHz cal signal, 
>> then switching to 137.780 kHz and recieving MP at 499.99 Hz.
>>
>> My modified HD-1420 VLF has a slow downward milli-Hz drift, so apparently 
>> the reference in the Spectracom receiver's reference output is spot 
>> on......
>>
>> Thanks guys !!!!
>>
>> 73  Mike wa3tts
>>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html