[Lowfer] 160m wspr again

[Michael Sapp]

OK, Got it....
Mike

----- Original Message ----- 
From: "lloyd chastant" <lloydc6 at gmail.com>
To: "Discussion of the Lowfer (US, European, &amp, UK) and MedFer bands" 
<lowfer at mailman.qth.net>
Sent: Thursday, October 17, 2013 7:39 PM
Subject: Re: [Lowfer] 160m wspr again


> mike you have to say RX dial 1.836.60 not the freq that will be showed on
> the wspr
>
> 2330 -25 -0.3 1.838027 0 W1FVB FN44 23
>
> 2330 -12 0.0 1.838087 0 WA3TTS EN90 30
>
> 2330 -21 -0.7 1.838102 0 K5DNL EM15 37
>
>
> Lloyd W3NF
>
>
>
> On Thu, Oct 17, 2013 at 11:24 PM, Michael Sapp <wa3tts at verizon.net> wrote:
>
>> Hello All: Running 160M wspr2 again tonite from EN90xn RX Dial 1.836590.
>>  Running 2.3 Watts (about +34) to my 18 x 70 x 18
>>
>> EWE with ground wire and ME11 B/U wattmeter showing about 1/2 to 3/4 watt
>> at the termination. So I'm listing power as +30.
>>
>>  EZ-NEC says the peak lobe of the EWE is -16.  It likely is coupling to a
>> nearby power line tho....40 to 70 ft away for the "on ground"
>>
>> distance.... Currently headed NE, may switch SW in a few hours....
>>
>> Mike wa3tts
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html