[Lowfer] Request for your frequency readout on my signal

[lloyd chastant]

yes a bit strange..wiggly guess i kinda read 1838.2284 more or less :-)but
that doesn't mean I am exact
Lloyd W3NF


On Tue, Oct 8, 2013 at 11:53 PM, Andy - KU4XR <ku4xr at yahoo.com> wrote:

> Hi all:
>
> Having determined today that my frequency counter can not be relied upon
> for an
> accurate reading. I will be transmitting again tonite in QRSS 30 to put
> the rig thru
> a workout under long keydowns.. I have set my dial to 1838.230 KHz and
> locked
> it down.. Anyone who would take the time to find me + / - 5 Hz from there,
> and
> give me an accurate readout, I really, really would appreciate it.. Of
> course, the
> signal will be going up-hill as the rig heats during transmit, so make
> note of that.
> and as the AC kicks on and off the signal could even look like a sine
> wave..
> I never have tried the radio like this before, but I did try WSPR-15, and
> found that
> it would drift too much for that mode.. Thanks for your time, and any
> reports
> will be appreciated..
>
> Andy - KU4xr
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 160.jpg
Type: image/jpeg
Size: 5754 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/lowfer/attachments/20131009/779ced51/attachment.jpg>