[Lowfer] xrs 4 & 3 tonite

[John Andrews]

Mike,

It's there! The two signals might look better with the 60 second slow 
setting. Makes a sharper trace, though it runs more slowly.

John, W1TAG

On 10/2/2013 8:45 PM, Michael Sapp wrote:
> Bob & John: XRS/4 usual robust signal. I'm seeing a 3/4 of the X and an the R from XRS/3 on/near spotted freq....
>
> http://i1296.photobucket.com/albums/ag19/wa3tts/xrs43a_zpsbfb6b7fd.jpg
>
> 23:27 to 2350 UTC capture is my receiver warming up on 100kHz reference signal, then a few minutes at 100kHz on the EWE, then 74.55 kHz on NE EWE transformer, then switched to SW EWE transformer with about 1900 ohms effective termination resistance  (75 to 175 ohm variable resistor in shack  times 11:1 transformer) with less local background noise....
>
> Would be nice to receive a complete capture from XRS/3 this evening !
>
> 73,  Mike wa3tts
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 8.5.455 / Virus Database: 271.1.1/5970 - Release Date: 07/06/13 16:46:00
>