[Lowfer] [Hifer] Sunday morning in ME

[John Andrews]

Mitch,

You're well in the clear, now, just above 400. . You could probably split the difference  and land back on 390. 

JA



On May 12, 2013, at 2:37 PM, Mitch Powell <mitch.powell at sympatico.ca> wrote:

> Hi John:
> Glad that you are seeing the epson chip at work. 
> Using a 78L05 for VCC - and the frequency hasn't been changed for years.
> However, took a look at Lyle's notes - and see that a slight variation is
> available - so have changed VCC to 4.5 volts.    DC input is ~50 milliwatts down from 70 mW. 
> That's right on the chip - there is no amplifier stage - so the rf output will be down.
> I will let it sit there for a day or so and see if there is any change in frequency relative
> to USC.
> Thanks for the comments.
> Mitch.
> On 2013-05-12, at 10:23 AM, John Andrews wrote:
> 
>> Listening/watching the Hifer watering hole this morning in Maine. Seeing NC, EH (weakly), the SIW's, MP and USC. The last two are in a death match for control of 13555.38. I remember Mitch as being about 10 Hz higher in the past. Screen shot:
>> 
>> http://www.w1tag.com/files/HF12MAY2013.jpg
>> 
>> John, W1TAG
>> FN43sv
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html