[Lowfer] Fwd: Re: [600MRG] Testing CW transmitter power supply on 486.00 KHz

[Pat Bunn]

 Sorry its 468.00 KHz

Pat

lloyd chastant <lloydc6 at gmail.com> wrote:

>Pat is it 468 or 486 Khz?? :)
>lloyd W3NF
>
>
>On Sun, May 5, 2013 at 7:59 PM, Pat Bunn <pbunn at patbunn.com> wrote:
>
>>
>>
>> -------- Original Message --------
>> Subject: Re: [600MRG] Testing CW transmitter power supply on 486.00 KHz
>> From: Pat Bunn <pbunn at patbunn.com>
>> To:
>> CC: 600mrg at w7ekb.com
>>
>> I am testing a KW power supply today on 468.00 HKz . will run through the
>> night. CW at approximately 8 wpm. Power out at approximately 200 watts
>> Working on two KW class transmitters based on W1VD design. Power supply is
>> hopefully complete.
>>
>> Pat
>> WG2XCT
>> WG2XLP
>> N4LTA
>>
>> All reports are appreciated.
>> _______________________________________________
>> 600MRG mailing list
>> 600MRG at w7ekb.com
>> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>______________________________________________________________
>Lowfer mailing list
>Home: http://mailman.qth.net/mailman/listinfo/lowfer
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Lowfer at mailman.qth.net
>Post must be less than 50KB total for message plus attachment!
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html