[Lowfer] XPQ

[Howell, Laurence J]

Ive just switched to QRSS3 for the day as we are compiling short term amplitude changes on the signal at 50 miles - this loop having high angle stuff we see a lot of short term ( a few secs) variations over the distance - Alan  NYK calling them "bubbles" so we doing a bit of recording - Ill shove it back to QRSS30 at dusk or when I get back from Anchorage.

Cheers

Laurence KL 1 X Wasilla BP51 IP


Subject: [EXTERNAL]Re: [Lowfer] XPQ

Oh Heck!  Sorry I missed the opportunity to capture you last night,
Laurence.

I need to check the lowfer reflector daily.

Neil Klagge

w0yse, Layton Utah


On Tue, Mar 5, 2013 at 11:36 PM, Laurence KL1 X <
hellozerohellozero at hotmail.com> wrote:

> XPQ Alaska 506.882 QRSS30 100W 10W ERP till advised
>
> Laurence KL1 X
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html