[Lowfer] MP back

[Mitch Powell]

Jay and Michael:
Thanks for the reports - it's nice to know that it's  back on  frequency and readable -
Much appreciated.
73

Mitch
On 2013-03-02, at 10:59 PM, Michael Sapp wrote:

> Mitch & All: MP doing well in EN90xn, capture shows MP at about -28, at 0330 it had improved to -27, my furnace cycle time evident on the capture. Had a few captures in Dec 2012 with MP at -33, but my EWE was 13' x 35' x 13' then vs 18' x 70' x 18' now.
> 
> Adding ground wire between the EWE transformer grounds on both ends of the antenna definitely lowered the noise at 35 kHz and down. Had constant growling down there. Much reduced now.
> 
> NPM on 21.4 solid, HWU on 21.75 solid, usual loud 24, 24.8, 25.2 sigs,  WWVB was over S9, CFH loud on 73.6  CKN solid on 76.2.... 
> 
> Heading to 600M band...WSPR 2....
> 
> .....73 Mike wa3tts
> 
> http://i1296.photobucket.com/albums/ag19/wa3tts/MPM313_zpsf25af715.jpg
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>