[Lowfer] MO, MLS, and PBO

[Mike Sanders]

Hi John and thanks. Try QRSS30 Normal instead of slow.
More to follow on the keying. 73

             K0AZ
       Mike Sanders
EM37cd SW Missouri
     www.k0az.com






-----Original Message-----
From: lowfer-bounces at mailman.qth.net [mailto:lowfer-bounces at mailman.qth.net]
On Behalf Of JD
Sent: Tuesday, January 29, 2013 1:05 AM
To: Discussion of the Lowfer (US, European, & UK) and MedFer bands
Subject: Re: [Lowfer] MO, MLS, and PBO

Didn't see MO during the noon hour, so I tuned away and watched WMS and SIW
for about an hour.  When I looked back later, here was MO.  Had to turn the
Argo sensitivity down quite a bit in the QRSS30 Slow capture (top of the
attached image).  To see the inter-element spacing better, I switched to
QRSS20 (lower part of image).  In fact, with only about 78 air miles between
us, it was no challenge to capture MO at QRSS3!  Just for fun, I'll probably
stitch together the three screens that were required for the full ID at
QRSS3 setting and post that at http://lwca.org/mb/ in the morning.

John