[Lowfer] DK7FC WSPR-15

[Douglas D. Williams]

I believe that 5 dB is too low. I'm not even seeing anything on the
waterfall at that level. Upped it to 34 dB and now I at least see images on
the waterfall display.

This is not the same as the "regular" version of the WSPR software, which
instructs the user to set the audio input level so WSPR reads close to 0 dB.

73, Doug KB4OER

On Sat, Jan 19, 2013 at 6:34 AM, Douglas D. Williams <kb4oer at gmail.com>wrote:

> Negative decodes for me.
>
> Can anyone tell me what dB level I should have WSPRX set for? Currently I
> have it set so it reads "receiving 5.4 dB" in the green box, bottom left
> corner.
>
> 73, Doug KB4OER
>
> On Fri, Jan 18, 2013 at 8:29 PM, Douglas D. Williams <kb4oer at gmail.com>wrote:
>
>> Thanks for the heads up.
>>
>> D. KB4OER
>>
>> On Fri, Jan 18, 2013 at 8:24 PM, John Andrews <w1tag at charter.net> wrote:
>>
>>> DK7FC is running WSPR-15 on 136.0 kHz + 1.608 kHz tonight, transmitting
>>> on the top and bottom of the hour. Decodes have been noted from W1VD, W4DEX
>>> and W1TAG. DF6NM is also on at +1.613 kHz, but there don't appear to have
>>> been any across-the-pond decodes thus far.
>>>
>>> John, W1TAG
>>> ______________________________**______________________________**__
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/**mailman/listinfo/lowfer<http://mailman.qth.net/mailman/listinfo/lowfer>
>>> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm>
>>> Post: mailto:Lowfer at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>>
>