[Lowfer] WE2XGR/2 in Jason mode 506.5 kHz

[John Andrews]

Pat,

Running XP Pro. I know it also works with 2000 and 98, but don't have 7 
on anything here.

Backing off on RF gain or audio input level should reduce the unwanted 
stuff. Jay's signal will appear as a vertical line that jumps between 
the two yellow "portals" at 11 second intervals.

Note that this mode has NO error correction, and hits on characters are 
common. Not sure what's going on in your case, though.

John A.

On 1/6/2013 7:49 PM, pbunn wrote:
> John
>
> Are you running Windows 7?  It does not seem to work on my computer. The select audio source does not work and the waterfall does not change when the radio is tuned. Just many parallel lines. Have a very string carrier but just jibberish decodes. Very little changes in the waterfall as the audio level is changed. Yet the audio graph moves up and down as would be expected.
>
> Pat
> N4LTA
>
> John Andrews <w1tag at charter.net> wrote:
>
>
> Easy. Had to turn the RF gain down. Trivia: The first TA JASON reception
> was just over 10 years ago (M0BMU rxd by W1TAG on 2200 meters).
>
> John, W1TAG
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.455 / Virus Database: 271.1.1/5512 - Release Date: 01/05/13 18:12:00
>