[Lowfer] KU4XR Hellschrieber on 160 meters tonite

Ed Phillips evp at pacbell.net
Tue Jan 1 19:48:14 EST 2013


Just checked and 40 dB over 9 BC intermod signal there so no possibility 
of copy.  Three 50 kW BC stations within 5 miles, 1 only about 1.2 miles 
on 1430 kHz.  I have a high pass filter on the    receiver and still get 
that much intermod. 

Ed



Andy - KU4XR wrote:

>HNY all:  I'll run for a bit tonite.. Running 10 watts to the 
>Windom.. Carrier frequency will be 1.836.700 MHz +/- error on
>this side.. I should be within 10 Hz up or down from there..
>I went just above the WSPR band to move away from the CW Ops..
>Spec Lab is in beacon mode.. For those it matters to, I am
>TX-ing on 1.835.200 with a 1500 Hz tone to get 1.836.700 MHz
>ARGO setting will probably work best in QRSS-10 SLOW mode
>TNX to any who look, and any captures, as I have no way to
>know what the transmitted signal looks like out there..
>
>73:
>
>Andy - KU4XR - Friendsville, TN.
>______________________________________________________________
>Lowfer mailing list
>Home: http://mailman.qth.net/mailman/listinfo/lowfer
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Lowfer at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>  
>


More information about the Lowfer mailing list