[Lowfer] WG2XCT beacon. QRSS30 on 470.20 KHz

[Pat Bunn]

Thanks Doug

We need to both get Jays disciplining mod done . I get tired of messing with calibration   my R75 is about 14 Hz low . It is fairly stable when warm though. I'd like yo get it so it is stable and on frequency all the time. I thought I'd finish the board before I open it up. The board gives a 30 MHz output but not a nice clean sine wave - instead a series of three waves of different amplitudes which may be what is expected. Filtering would clean it right up. That may be OK but I want to work on it a little more.


Pat
N4LTA

"Douglas D. Williams" <kb4oer at gmail.com> wrote:

>Pat your signal is coming in "dogbones" in TN. Drift is mine, as I just
>turned the R-75 on. I really should just leave it on all the time, from
>October until March.
>
>I'll post another screenshot when I get the full call.
>
>73, Doug KB4OER
>
>On Wed, Feb 20, 2013 at 2:34 PM, Pat Bunn <pbunn at patbunn.com> wrote:
>
>> Running qrss30 beacon until tomorrow morning on 470.2 KHz  testing
>> transmitter FETs
>>
>> Pat
>> WG2XCT
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>______________________________________________________________
>Lowfer mailing list
>Home: http://mailman.qth.net/mailman/listinfo/lowfer
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Lowfer at mailman.qth.net
>Post must be less than 50KB total for message plus attachment!
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html