[Lowfer] New Wolf Trouble

[JJ]

I spoke too soon.  I increased the sample to 1500 and that centered the 
waterfall display back at 700.  But I am still obviously out of the 
passband.  No display.

On 2/17/2013 7:27 PM, JJ wrote:
> Never mind....
> Talk about a HUGE soundcard error!  Wow...
> Jon
>
> On 2/17/2013 7:21 PM, JJ wrote:
>>
>> I have the new version of Wolf installed.  I set the sampling to 1200 
>> hz and my center freq to 700.  The center freq of the waterfall moves 
>> to about 580 hz.  And because of this, no decode and no signal 
>> showing on the waterfall.
>> If I set the sample back to 8000 and keep my center freq at 700 Wolf 
>> works as it should.
>> What am I missing?
>>
>> Jon
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>