[Lowfer] Lowfer WI Daytime Copy at 110 miles

[pbunn at patbunn.com]

I am receiving WI well this morning. I can copy him with ARGO NDB mode. The 
.gif does not look as clear as the screen. I have a keyer for him that I 
hope to send him Monday. I can't hear him as a have a howling carrier about 
500 Hz above his signal.

Pat
N4LTA

-----Original Message----- 
From: ToddRoberts2001 at aol.com
Sent: Friday, February 15, 2013 11:33 PM
To: lowfer at mailman.qth.net
Subject: [Lowfer] Lowfer WI Daytime Copy at 110 miles

Pretty good copy here daytime of new  Lowfer beacon WI
run by Walt Glazar W3WI on Friday 02/15.
WI is reading  187.507.49 kHz. and  is sending normal CW mode today
at about 5WPM.

I was hearing WI well enough to try an NDB speed capture
on the  ARGO screen  :

http://imagehost.vendio.com/a/32051022/view/0047.jpg

I  understand Pat has built a QRSS keyer for Walt so he
will be able to send  QRSS30 soon. In the meantime be on the
lookout  for a normal CW beacon  like we used to listen for
back in the 90's before QRSS.

73 - Todd  WD4NGG

______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wi.gif
Type: application/octet-stream
Size: 10242 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/lowfer/attachments/20130216/c536614a/attachment.obj>