[Lowfer] WI ??

[pbunn]

Dex,

I'm going to make a set of 4 PC Boards in a little while and make Walt's keyer. I'll make it QRSS 30 sending WI and at the end send QSL to Walt's call in 10 wpm CW and then repeat..  Or I'll leave out the cw if not needed.

I probably can drop it in the mail tomorrow to wherever it need to go.

I'll have some extra boards if someone needs them later.

Pat



-----Original Message-----
From: lowfer-bounces at mailman.qth.net [mailto:lowfer-bounces at mailman.qth.net] On Behalf Of Dexter McIntyre W4DEX
Sent: Friday, February 15, 2013 11:10 AM
To: k3siw at sbcglobal.net; Discussion of the Lowfer (US, European, & UK) and MedFer bands
Subject: Re: [Lowfer] WI ??

Garry Hess wrote:
> Dex, thanks for the input that the 4 second dashes from awhile back 
> are now replaced by "WI". The mp3 file indicates WI is sent 
> continuously in Morse code at a rather slow rate. I see something just 
> above 187.5 kHz at your dropbox but it doesn't look like continuous CW 
> of WI. Perhaps that's because the ARGO threshold and QSB aren't 
> allowing the dots and dashes to clearly stand out.
Walt was experimenting with the keying this morning.  Pat has graciously offered to build Walt a PIC keyer.  With that in place WI will get lots of reports.

Dex
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html