[Lowfer] WG2XCT beacon. 468.0 KHz QRRS 30

[pbunn]

Thanks for the report Todd.

I hope the dit timing is close. I added a factor of 10 x to my QRSS 3 delay routine  It seemed close so I left it at that. I use a PIC12F509 chip that is about 5 generation of software adaptation from an article I wrote in CQ back in the 80s on a 8049 micro  and then adapted in QST on a PIC 18 pin chip  in the 90s. Its now on a little   8 pin chip with about ten times the power and storage of the 8049 .


Pat
N4LTA

ToddRoberts2001 at aol.com wrote:


Nice copy on WG2XCT 468.000 kHz QRSS30 here in Southern SC
on Monday 02/11/13 late afternoon/early evening.
I live about 200 miles  South of Pat on Hilton Head Island, SC.

73 Todd  WD4NGG

http://imagehost.vendio.com/a/32051022/view/0023.jpg

______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html