[Lowfer] WSPR 15 micro power transmission in 474.2 + 1615

[pbunn at patbunn.com]

Here's the wiggler that I am seeing.

Pretty sure it’s a WSPR-15 signal. No one want to claim it?

Pat
N4LTA

-----Original Message----- 
From: Dexter McIntyre W4DEX
Sent: Saturday, February 09, 2013 5:15 PM
To: Discussion of the Lowfer (US, European, &UK) and MedFer bands
Subject: Re: [Lowfer] WSPR 15 micro power transmission in 474.2 + 1615

pbunn wrote:
> See a good signal at about +1618 above 474.2 dial but it is wiggling too 
> much to decode. Its moving back and forth about a Hz or so.
>
>
Not seeing that signal here Pat.  I tried to remotely setup a grabber
showing my WSPR screen so you can see your signal.  Don't know if it
will work but if so it's set to update every 10 minutes.

http://dl.dropbox.com/u/15095569/w4dex/grabber1_00000.jpg

Looks like the waterfall got reset but is displaying.

Will let it run.  Will be back home in a few hours.

Dex
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wiggler1.gif
Type: application/octet-stream
Size: 5885 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/lowfer/attachments/20130209/549dde48/attachment.obj>