[Lowfer] WSPR 15 micro power transmission in 474.2 + 1615

[pbunn]

I forgot . The grabber is working.

Thanks

Par

Dexter McIntyre W4DEX <dexter.mc at gmail.com> wrote:


pbunn wrote:
> See a good signal at about +1618 above 474.2 dial but it is wiggling too much to decode. Its moving back and forth about a Hz or so.
>
>
Not seeing that signal here Pat.  I tried to remotely setup a grabber
showing my WSPR screen so you can see your signal.  Don't know if it
will work but if so it's set to update every 10 minutes.

http://dl.dropbox.com/u/15095569/w4dex/grabber1_00000.jpg

Looks like the waterfall got reset but is displaying.

Will let it run.  Will be back home in a few hours.

Dex
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html