[Lowfer] WG2XCT WSPRX-15 Today 468 .1 KHz Dial 50 % transmitduty cycle TX Audio 1611

[jrusgrove at comcast.net]

Pat

Why not use the standard 474.2 dial + 1611? 

Jay W1VD  WD2XNS  WE2XGR/2



----- Original Message ----- 
From: <pbunn at patbunn.com>
To: "Discussion of the Lowfer (US, European, &amp;UK) and MedFer bands" <lowfer at mailman.qth.net>
Sent: Sunday, February 03, 2013 1:59 PM
Subject: Re: [Lowfer] WG2XCT WSPRX-15 Today 468 .1 KHz Dial 50 % transmitduty cycle TX Audio 1611


>I am now transmitting 468.1 KHz   50% duty Cycle  1611 Tx Audio about 7dBM 
> ERP
> 
> Pat Bunn
> N4LTA
> WG2XCT
> 
> -----Original Message----- 
> From: pbunn at patbunn.com
> Sent: Sunday, February 03, 2013 5:09 PM
> To: Discussion of the Lowfer (US, European, &amp;UK) and MedFer bands
> Subject: [Lowfer] WG2XCT WSPRX-15 Today 468 .0 KHz Dial
> 
> I will be transmitting a WSPRX -15  signal  - QRP about 6 V pp  to antenna
> or a little less than 100 mW. ERP is approximately  7 mW or a bit less.
> 
> Frequency is 468.00 on upper SSB dial. It will run early Monday morning
> unless it burns up first.
> 
> 
> Pat
> WG2XCT
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html