[Lowfer] Can I expect to receive .... Schedule

[WD8ARZ]

It is very readable Doug, thank you.

Once I finish a modification on a Geiger counter, finding a mike and 
connector for my T4XC, and redo my capacity hat for my HiQ 5-160 mobile 
antenna, this tuner project will be next on my to do list .... hi hi

Have a TS-480HX in the mobile, and a FT-1000MP on the base feeding that 
windom antenna. Some times am on 7218 or 7225 of late, but available for 
a schedule if you like. Am retired a few months, so can be flexible ... 
hi hi

  73 from Bill - WD8ARZ
South Bend, Indiana a mile south of the Michigan border
You know, the lake effect snow area ... hi

On 2/2/2013 8:28 AM, Douglas D. Williams wrote:
> As I recall, I made mine with a bunch of chokes I purchased from Mouser,
> and a rotary switch to select between them. For the "C" I used an air
> variable cap as well as a switch that inserted even more "C" from fixed
> capacitors as needed. You could definitely hear a big increase in band
> noise when you adjusted the settings properly for impedence matching. The
> bandwidth of the match was narrow and the lower I went in frequency the
> more narrow the match became. Of course, it was strictly for receive.
> I'll see if I can scan that old article. Im afraid the quality is bad.
> Hopefully, it will be readable.
> 73, Doug KB4OER
>