[Lowfer] Some 630 meters WSPR 2 for tonight...

[John Langridge]

The problem is likely that he is too close to 800hz. The software seems to roll off within about 25 hz of the band edges.

73,

John XIQ




________________________________
 From: Douglas D. Williams <kb4oer at gmail.com>
To: "Discussion of the Lowfer (US, European, &amp, UK) and MedFer bands" <lowfer at mailman.qth.net> 
Sent: Sunday, December 22, 2013 7:07 PM
Subject: Re: [Lowfer] Some 630 meters WSPR 2 for tonight...
 

Change to a wider filter and see. I'm using WPRX.


On Sun, Dec 22, 2013 at 8:06 PM, Jay Hainline <ka9cfd at mtcnow.net> wrote:

> Strangely, Bob is real loud here but no decodes. Yet decoding XIQ. Using
> wspr-x. Going to try Wspr 2.11 and see if it works better.
>
>
>
> Jay Hainline KA9CFD
> Colchester, IL EN40om
>
> -----Original Message----- From: Douglas D. Williams
> Sent: Monday, December 23, 2013 00:59
> To: Discussion of the Lowfer (US, European, &amp,UK) and MedFer bands
> Subject: Re: [Lowfer] Some 630 meters WSPR 2 for tonight...
>
>
> Strangely enough, I'm decoding you on the SDR but not on the R75. I'm
> decoding WG2XIQ on both receivers, and his signal is much weaker than
> yours.
>
> Hmmmmm....
>
>
>
>
> On Sun, Dec 22, 2013 at 7:49 PM, Douglas D. Williams <kb4oer at gmail.com
> >wrote:
>
>  Getting decodes here, Bob.
>>
>> I'm running a little experiment of my own, using two different receivers,
>> same antenna. Seeing if one receiver gets more decodes than the other.
>>
>> -Doug
>>
>>
>> On Sun, Dec 22, 2013 at 7:02 PM, John Bruce McCreath <
>> weazle at hurontel.on.ca> wrote:
>>
>>  I'll have a go, Bob.  I assume 474.000 dial?  Rx up and running as I type
>>> this.
>>>
>>> 73, J.B., VE3EAR
>>>
>>> LowFER Beacon "EAR"
>>> 188.830 kHz. QRSS30
>>> EN93dr
>>>
>>>
>>>
>>>
>>>
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>>
>>  ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html