[Lowfer] WSPR15 running at 73 dial freq-74.547 TX freq...

[n8tl]

On 13-12-10 10:21 PM, Douglas D. Williams wrote:
> I'm probably just too stupid to figure it out.
>
> Thanks, brother.
>
> 73 Doug KB4OER
>
>
>
>
>
>
>
>
>
> On Tue, Dec 10, 2013 at 5:09 PM, n8tl <n8tl at woh.rr.com> wrote:
>
>> On 13-12-10 08:39 PM, Douglas D. Williams wrote:
>>
>>> So...is WSPR 15 the same thing as WSPRX?
>>>
>>> -Doug
>>>
>>>
>>> On Tue, Dec 10, 2013 at 3:24 PM, Bob Raide <rjraide at hotmail.com> wrote:
>>>
>>>   Running WSPR 15 for few hours to see if reports decodes.  Appreciate any
>>>> decodes for the test-Bob WG2XRS/4
>>>> ______________________________________________________________
>>>> Lowfer mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Lowfer at mailman.qth.net
>>>> Post must be less than 50KB total for message plus attachment!
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>>   ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>   Doug:
>> WSPR15 is Joe's LF version of WSPR2.  It has longer transmission time.
>>   WSPRX is a combination of
>> WSPR2 and WSPR15 modes.
>>
>> Tom N8TL
>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
Naw....your a pretty sharp guy....I compiled WSPR4.0 r 2874 on LUbuntu 
12.04 Linux.....works
great.  I haven't got my 10 foot loop assembled yet a my condo....so I 
pretty much run WSPR2.0
on HF.  When I get the loop built, I will then be using WSPR15 on the LF 
bands in receive mode.
There is no room at this QTH for LF TX antennas.

73's

Tom N8TL