[Lowfer] WG2XCT QRSS3 Beacon on 475.1 KHz

[Pat Bunn]

John

It was a place in CA that charged slightly more per foot than getting a full stick but they cut it. Shipping was about 35 dollars so the 2 foot length cost me about $80 but that was cheaper than a 10 foot section and trying to cut it. They also sell thin wall drain for less and it is plenty sturdy for a coil form and lighter. I don't have the name of the company here. I'll send it when I get home Monday.

Pat

Sent from my iPhone

On Aug 30, 2013, at 3:46 PM, JD <listread at lwca.org> wrote:

> Good luck on the coil winding!
> 
> Who is your PVC vendor, Pat?  I recently acquired some 12" PVC duct pipe for future use from a local heating supply firm, and it was anything _but_ reasonable for a full 10 foot "stick."  And, I still have the problem of figuring how to cut it neatly.  No small task for someone with my coordination--or lack thereof.  :)
> 
> John 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html