[Lowfer] WG2XCT testing transmitter CW at 475.3 KHz

[Pat Bunn]

I have moved to 475.2 KHz to move away from /7 at 475.33 KHz

Pat

Sent from my iPhone

On Aug 25, 2013, at 7:36 PM, Pat Bunn <pbunn at matrixei.com> wrote:

> I will be testing my transmitter tonight using 8 wpm CW for several hours tonight. Presently running about 250 watts output. Efficiency is very good at about 95% so it is working well so far. Gate and Drain waveforms look good, much better than before. Tested it at 600 watts into a dummy load but will leave it throttled back tonight. 
> 
> Reports are appreciated.
> 
> Pat
> N4LTA
> WG2XCT
> 
> Sent from my iPhone
> 
> On Aug 25, 2013, at 7:15 PM, John Andrews <w1tag at charter.net> wrote:
> 
>> One characteristic of this band is the deep and slow fading, at least over the distances we are presently working. If you unsuccessfully look for a signal for even 30 minutes, you may be surprised to find it there later in the hour. Dex's copy went from virtually nothing to pretty good in an hour's space.
>> 
>> JA
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html