[Lowfer] Lowfer transmitter testing

[Pat Bunn]

Been using a Rig Expert and had very good luck with it for tuning the variometer and building matching networks. 

Are you using a capacitive divider in your or a transformer divider?

Pat

Sent from my iPhone

On Aug 17, 2013, at 9:22 PM, Steve <VE7SL at shaw.ca> wrote:

> Pat - if you haven't yet built the 'scope-match' I would highly recommend that it goes to the top of your project list. It is really one of the most valuable pieces of equipment in the shack and you will never have to worry about impedance mismatch or being off-resonance ever again!
> 
> Steve / 73
> 
> 
> 
>> Not sure what happened. Was running cool at about 15 amps at 40 volts  and then one get blew up in a small ball of fire. May have been the antenna .
> 
> 
> 
> 
> WEB - "The VE7SL Radio Notebook":  http://members.shaw.ca/ve7sl 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html