[Lowfer] new interface kit offered by 4sqrp group

[Paul Daulton]

JD try again I didnt have any trouble with any of the links. 

Kit has three transformers, two 2n3904, about 8 resistors and 7 caps, 
with five jacks and one pot. The case is pc board with silk screen 
cover for appearance. All drilled and easy assembly. About 2 hour 
assembly. 

Assembled makes a nice unit. For rec will provide  isolation between 
computer and rec, I use jumper from rec to computer sound card , not 
the best. For wspr and psk this unit is ideal. No serial or usb needed. 
Internal circuits key ptt and send audio into mic input. I plan to use 
mine on wspr on 40 with my MST400 tranceiver, an Austrailian design see 
www.ozqrp.com . 

Paul k5wms

Quoting JD <listread at lwca.org>:
> Too bad the links in that page (at least some of them) don't work.  It'd be
> nice to see what the kit contains. 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

Paul Daulton K5WMS
beacon WMS 185.302 khz qrss30/slow 24/7
Jacksonville,Ar 72076
em34wu