[Lowfer] WE2XGR/2 in JT9-10 mode

[John Andrews]

Finally got a decode!

JA

On 10/28/2012 8:49 AM, jrusgrove at comcast.net wrote:
> Also, may have to reset the green passband marker to 1450 after the change.
>
> Jay
>
> ----- Original Message -----
> From: <jrusgrove at comcast.net>
> To: "Discussion of the Lowfer (US, European, &amp;UK) and MedFer bands" <lowfer at mailman.qth.net>
> Sent: Sunday, October 28, 2012 8:44 AM
> Subject: Re: [Lowfer] WE2XGR/2 in JT9-10 mode
>
>
>> Crank up the FFT Bins/pixel
>>
>> Jay W1VD  WD2XNS  WE2XGR/2
>>
>>
>> ----- Original Message -----
>> From: "John Andrews" <w1tag at charter.net>
>> To: "Discussion of the Lowfer (US, European, &amp;UK) and MedFer bands" <lowfer at mailman.qth.net>
>> Sent: Sunday, October 28, 2012 8:47 AM
>> Subject: Re: [Lowfer] WE2XGR/2 in JT9-10 mode
>>
>>
>>> At least on this computer, WSJT-X, the low end of the receiving passband
>>> appears to be 1000 Hz, with no option to change it. For the JT9-2 tests
>>> last night, this was no issue, as the 1400-1500 Hz tones fell in the
>>> wider passband. But for JT9-10, you are stuck with 1000-1100 Hz.
>>>
>>> So, I would suggest a USB dial frequency of 494.800 for this morning's
>>> tests. Quirky.
>>>
>>> John, W1TAG
>>>
>>> On 10/28/2012 8:04 AM, jrusgrove at comcast.net wrote:
>>>> WE2XGR/2 will be testing in WSJT-X JT9-10 mode for the next few hours on 494.400 dial (+1450).
>>>> This
>>>> mode has a theoretical s/n threshold of -37 dB (relative to a 2500 Hz BW). Reports are
>>>> appreciated.
>>>> Note that it may or may not be necessary to close and restart the program after a mode change
>>>> ...
>>>> it
>>>> seems to be required in transmit mode.
>>>>
>>>> Also, rather than using the 'canned'  CQ message when in beacon mode, the transmission will be
>>>> WE2XGR/2 TEST ... which the program accepts ... probably a good idea for all stations
>>>> transmitting
>>>> in beacon mode.
>>>>
>>>> Jay W1VD  WD2XNS  WE2XGR/2
>>>>
>>>> ______________________________________________________________
>>>> Lowfer mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Lowfer at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>>
>>>>
>>>>
>>>> No virus found in this incoming message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 8.5.455 / Virus Database: 271.1.1/5356 - Release Date: 10/26/12 18:34:00
>>>>
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.455 / Virus Database: 271.1.1/5356 - Release Date: 10/26/12 18:34:00
>