[Lowfer] WE2XGR/2 in PSK sounder mode

[lloyd chastant]

Wow OK I'll try to set all that and see what comes out :-)
Thanks
Lloyd

On Sat, Mar 17, 2012 at 1:14 AM, <jrusgrove at comcast.net> wrote:

> Lloyd
>
> Here's the 'quick start' ...
>
> Open the STANAG.set file (in the same folder as the program) in Wordpad
> and edit the lines to be
>
> 8000
> 1500
> *leave as is*
> 10
> 1
> *leave as is*
>
> Save the file.
>
> Shut the program down if already running and restart. The program will
> then access the new
> STANAG.set information.
>
> Tune the receiver to 498 kHz in USB mode.
>
> If you are within groundwave range (or receiving a strong signal via an
> ionospheric layer) the
> correlation display at the bottom should show a tall peak with smaller
> peaks on each side. Put the
> cursor on the tall peak and left click the mouse.
>
> A horizontal line should appear in the Correl-O-Gram ... but it may have
> some tilt. Use the clock
> offset buttons to the right to remove the tilt. You may have to repeat the
> step above to get the
> horizontal line back to zero.
>
> A station within groundwave distance will see the horizontal groundwave
> line and possibly a second
> line above that is the reflection from the ionosphere. The time delay to
> and from the reflective
> layer of the ionosphere is shown on the vertical scale. Chances are you
> are not seeing any
> groundwave due to the distance between us so you may see only one
> horizontal line ... unless another
> higher up layer is also reflecting the signal.
>
> Hope this helps get you started.
>
> Jay
>
>
> ----- Original Message -----
> From: "lloyd chastant" <lloydc6 at gmail.com>
> To: "Discussion of the Lowfer (US, European, &amp,UK) and MedFer bands" <
> lowfer at mailman.qth.net>
> Sent: Friday, March 16, 2012 8:24 PM
> Subject: Re: [Lowfer] WE2XGR/2 in PSK sounder mode
>
>
> > Jay how or what to set to receive in PSK sounder??
> > Lloyd
> >
> > On Fri, Mar 16, 2012 at 10:22 PM, <jrusgrove at comcast.net> wrote:
> >
> >> WE2XGR/2 will be transmitting in PSK sounder mode tonight on 510 kHz USB
> >> (dial) from 2300Z for a
> >> couple hours. John, W1TAG, has requested the signal for some
> measurements
> >> as we normally have a good
> >> groundwave signal between us. Other 'nearby' stations may wish to tune
> in
> >> and have a look.
> >>
> >> The software can be found at
> http://www.qsl.net/zl1bpu/SOFT/PSKSounder.htm.
> >>
> >> Jay W1VD  WD2XNS  WE2XGR/2
> >>
> >> ______________________________________________________________
> >> Lowfer mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Lowfer at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >>
> > ______________________________________________________________
> > Lowfer mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Lowfer at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>