[Lowfer] QRSS60

[Mitch Powell]

Sorry - just outside again - creating a path to the tuner  :-)
Was running 200 watts when completed testing - 
When I connected the loops - added the four additional capacitors ! ! ! !
with the same dc input I was up in antenna current - as you would expect.

Now am ( at 4:20 in the afternoon EST ) running 250 watts - and antenna current is
at 19 amps - which is incredible !

Original loop 340 feet  - new parallel one is 240 feet.

Knocked the total inductance in half.

Mitch

On 2012-12-31, at 4:19 PM, <jrusgrove at comcast.net> wrote:

> Mitch
> 
> TX power?
> 
> Jay
> 
> ----- Original Message ----- From: "Mitch Powell" <mitch.powell at sympatico.ca>
> To: "Discussion of the Lowfer (US, European, &amp;UK) and MedFer bands" <lowfer at mailman.qth.net>
> Sent: Monday, December 31, 2012 3:50 PM
> Subject: Re: [Lowfer] QRSS60
> 
> 
>> Doug:
>> Just finished ( standing in the snow ) adding a second loop in parallel with the old one.
>> Current has increased from 14 to 17.5 amps so something must be working .
>> If you're still around 137 could you check it out ?
>> Thanks
>> Mitch
>> On 2012-12-31, at 3:18 PM, Douglas D. Williams wrote:
>>> And, of course, the file now. :-)
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>