[Lowfer] XCT in EN90xn

Pat Bunn pbunn at patbunn.com
Wed Dec 19 19:58:47 EST 2012


80 milliwatts  I hate these auto correctors on these phones.

Pat Bunn <pbunn at patbunn.com> wrote:

>Mike
>
>I was running about 30 MW to my vertical which is hopefully about 4% or so efficient so I loaded zero dBm.
>
>I added a small amp after getting no decodes and forgot to change the setup. I actually was running about 2 watts to the variometer so the erp is about 80 MW if I am lucky. I chances the setup to 20 dBm which is probably optimistic.
>
>Pat
>
>Michael Sapp <wa3tts at verizon.net> wrote:
>
>>Pat & All:  Nice to know I can decode 0dBm @ 400 miles out
>>
>>http://i1296.photobucket.com/albums/ag19/wa3tts/xct1220_zps7f528512.jpg
>>
>>SW EWE pointed 230 deg>VE7BPO 533kHz LPF with 1020 kHz trap>modified "Griefkit" HD-1420 VLF Converter>FT-817 w/TCXO9>Acer netbook
>>
>>My FT-847 would have decoded most of those traces, the FT-817 ceramic resonator on SSB not even close to a "std 2.5 kHz filter"
>>
>>I'll be down around 475.7 rx after 9pm....
>>
>>73  Mike wa3tts
>>______________________________________________________________
>>Lowfer mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Lowfer at mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
>______________________________________________________________
>Lowfer mailing list
>Home: http://mailman.qth.net/mailman/listinfo/lowfer
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Lowfer at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html


More information about the Lowfer mailing list