[Lowfer] 497.0 Mhz WG2XCT QRSS3 beacon

[jrusgrove at comcast.net]

Pat

Let me know when you're ready for a QSO.

Jay W1VD  WD2XNS  WE2XGR/2


----- Original Message ----- 
From: "pbunn" <pbunn at matrixei.com>
To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" <lowfer at mailman.qth.net>
Sent: Monday, August 27, 2012 9:46 AM
Subject: [Lowfer] 497.0 Mhz WG2XCT QRSS3 beacon


>
> I am getting close to being ready for transmitting with my experimental license.
>
> My plans are to start with a QRSS3 beacon running approximately 100 watts to a vertical antenna.
>
> I am planning to use the frequency 497.00 Khz unless that is a problem for the existing 630 meter 
> users. Any comments would be appreciated.
>
> I have the  keyer,  exciter and transmitter working and am finishing the output filter this week. 
> The antenna is next and I will probably very inefficient at the start of testing. Plans are for 
> eventually a 60 foot vertical.
>
> Again, any comments would be appreciated. I am frequency mobile so if 497.0 is a problem let me 
> know or suggest something better. I am limited to 495 - 510 Khz.
>
>
>
> Pat Bunn
> N4LTA, WG2XCT
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html