[Lowfer] WMS back on

[Paul Daulton]

I fired up WMS on the workbench and found everything ok, but when I reinstalled it at the antenna there is some erratic behavior. I have two ground rods with about 30 radials, all four of the clamps are loose. These clamps are either lead or pot metal and may have to be replaced. For now I will let it run unitl I can get to the hardware store and get some new clamps. 

Paul Daulton K5WMS
beacon WMS 185.302 khz qrss30/slow 24/7
Jacksonville,Ar 72076
em34wu