[Lowfer] Monitor the Watering Hole-ARGO, EMP-CW, TAG-WOLF, XR-WSPR, SJ-ARGO, all at the same time

[Andy - KU4XR]

No, Andy hasn't finally lost ALL of his marbles.. Another bout of
curiousity got to me, and I had to try this out. AND; It's Working !!

Radio Dial set to 184.600 KHz - USB, using a 2.4 KHz Bandwidth
and using my DSP audio Filter to feed the second sound card.

Running 1 ARGO window set for 700 Hz to see the Watering Hole...

Running WOLF set for a receive offset of 1200 Hz for " TAG "

Running WSPR normal settings for XR4TN

Running a 2nd ARGO window set for 2250 Hz to see " SJ "

Listening audibly for " EMP " at a tone frequency of 1385 Hz

And doing emails, all at the same time !!!

My PC is not a powerhouse: a 2.1 GHz CPU, 512 MB RAM, WinXP-PRO

Argo runs on the 1st soundcard, and WOLF, and WSPR are sharing
the second soundcard that's fed by the DSP Audio Filter...
Of course it's too early in the evening for signals to show up,
but it's surprising the heck out of me that I can run all these
instances of software at the same time, and they are working..

Can't say that the PC won't crash from the work load; but it's 
been running for 1/2 hour so far with no IRQ problems...

Talk about " Multi Tasking " 



Andy - KU4XR - EM75xr - Friendsville, TN. USA

LOWfer Beacon " XR " 
 
Coordinates:  N:  35º 43' 54" - W:  84º 3' 16"

http://www.myspace.com/beaconxr

http://ku4xr.webs.com

http://lwca.org/community/YaBB.pl

*** The 5 most important words ever spoken ***

http://ku4xr.webs.com/5mostimportantwords.htm