[Lowfer] " XR " in QRSS-60 tonite

[Andy - KU4XR]

Hi all:

Well I wound 3 extra turns onto the inside matching coil / variometer.
When I connected the transmitter to it, and tweaked everything up;
the antenna is loading to 142 Milli Amps tonite, and the ground is 
still damp. I may end up being surprised, and this antenna perform
OK. I will be doing lots, and lots of peaking and tweaking in the
days ahead, but I'm going to let it burn tonite and see if it really
does put a signal into the ether. I haven't checked my frequency;
but it should be close to 185,298.7??-ish ... Thanks to anyone who
gives it a look see tonite.

73 for now, and it sure feels good to hear the beacon back on....


Andy - KU4XR - EM75xr - Friendsville, TN. USA
LOWfer Beacon " XR " @ 185.29875 KHz ( QRSS-60 )

*** Temporarily " TESTING " the new antenna ***

Coordinates:  N:  35º 43' 54" - W:  84º 3' 16"
http://www.myspace.com/beaconxr

*** The 5 most important words ever spoken ***

http://ku4xr.webs.com/5mostimportantwords.htm