[Lowfer] 30 Meter Watering Hole Friday Night

[rick kirby]

 Hi all,

I  am a little confused over this whole 30 meter beacon thing. How are we 
running  running beacons below 10 meters when the FCC says we can only run 
automatic control 10 meters and above?

 Thanks
               Rick  KA2PBO



----- Original Message ----- 
From: "Mike-WE0H" <we0h at gmx.com>
To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
<lowfer at mailman.qth.net>
Sent: Saturday, June 12, 2010 14:08
Subject: Re: [Lowfer] 30 Meter Watering Hole Friday Night


I just have the toroids to wind and solder on the board then mine is
done. Been building my new transverter lately so the 30m beacon is off
to the side of the bench.

AA6DY is always a very strong signal here so either he is using a beam
or higher power. Same with WA5DJJ. Not as fun when people beacon with a
too high of a ERP no matter how they achieve it.

Mike
WE0H




Todd R wrote:
> Hi All,
> I was wondering if anyone has been able to get their 30 meter
> QRSS QRP kit beacons from Dayton FDIM running yet?
>
> Friday evening 06/11/10  I saw some good QRSS beacon  activity
> between 10.140.000 - 10.140.060 MHz on the ARGO viewer.
> Most beacons seemed to be running QRSS3 or thereabouts.
>
> Here are beacons seen last night :
> AA6DY - 10.140.066 mark frequency
> K9EW - 10.140.030 mark frequency
> WØTJ - 10.140.020 mark frequency
> WA5DJJ - 10.140.003 mark frequency
>
> All seem to be running narrow FSK with a mark and space frequency.
> The space frequency seems to be about 5-6Hz lower than the mark 
> frequency.
>
> 73 - Todd WD4NGG
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html