[Lowfer] WSPR experiment

[Andy - KU4XR]

Rig was getting hot, so I backed off to 50% tranmit cycle.
2 min. on / 2 min. off . Still at 5 watts on 3.594.15 USB.
Reception should be in the WSPR window at 3.592.60 USB.
This is my first attempt, so something may not be right
on my end ???


Andy - KU4XR - EM75xr - Friendsville, TN. USA
LOWfer Beacon " XR " @ 185.29875 KHz ( QRSS-60 )
Coordinates:  N:  35º 43' 54" - W:  84º 3' 16"
http://www.myspace.com/beaconxr
http://webpages.charter.net/ku4xr/


--- On Sat, 2/27/10, ToddRoberts2001 at aol.com <ToddRoberts2001 at aol.com> wrote:

> From: ToddRoberts2001 at aol.com <ToddRoberts2001 at aol.com>
> Subject: Re: [Lowfer] WSPR experiment
> To: lowfer at mailman.qth.net
> Date: Saturday, February 27, 2010, 1:14 AM
> Hi All,
> I was copying Andy's WSPR signal fine here.
> 
> I was getting  a solid string of decodes on dial freq
> 3594.200 USB / transmit freq 3595.700  up until
> 1:08 AM EST.
> 
> Now signal is cutting out and sounding  peculiar.
> Perhaps RF feedback getting into something?
> Signal seems to have  stopped now.
>  
> Now started again at 1:12AM EST.
> Now stopped again at 1:14AM EST.
> 
> 73 Todd WD4NGG
>  
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>