[Lowfer] WM change
Richard Goodman
wa3usg at verizon.net
Wed Feb 24 19:02:29 EST 2010
Snow ... snow .... and more snow! When will it end?? Actually, I love the
stuff but it does bring with it lots of static crashes. I find that after
the a good snow storm, many times conditions are quiet & absolutely
spectacular. Looking forward to it.
73
Dick, WA3USG
-----Original Message-----
From: lowfer-bounces at mailman.qth.net [mailto:lowfer-bounces at mailman.qth.net]
On Behalf Of Bill Ashlock
Sent: Wednesday, February 24, 2010 6:30 PM
To: lowfer at mailman.qth.net
Subject: Re: [Lowfer] WM change
Hi Dick,
Don't give up! I didn't get to work on the TX loop last night or today,
either. It was snowing from the time I got back to the site and hasn't
stopped since. Maybe tomorrow morning there will be a clear hour or two.
Bill
> From: wa3usg at verizon.net
> To: lowfer at mailman.qth.net
> Date: Wed, 24 Feb 2010 00:03:32 -0500
> Subject: Re: [Lowfer] WM change
>
> danged static ... right now I can't even find my foot!
>
> 73
> Dick, WA3USG
>
>
> -----Original Message-----
> From: lowfer-bounces at mailman.qth.net
> [mailto:lowfer-bounces at mailman.qth.net]On Behalf Of Bill Ashlock
> Sent: Tuesday, February 23, 2010 8:44 PM
> To: lowfer at mailman.qth.net
> Subject: [Lowfer] WM change
>
>
>
> Lowfer Watering Hole viewers,
>
> The lower WM (Ellsworth) will be off for at least part of tonight and
maybe
> tomorrow for promised modifications. This afternoon I replaced the #12
loop
> conductor with RG-8 but the new loop has not been re-resonated, and the
> turns ratio of the coupling xfmr modified.
>
> The task was not as easy as predicted. The plan was to pull up the RG-8
with
> the existing #12 wire but the much-thicker cable became snagged in a
crouch
> at the top. Had to pull it down and repeat the process in the other
> direction. This worked but the 'pull' was so strong at times that I had to
> use a come-along winch to get it to come though all the numerous branches
> resisting the effort. At least the wire didn't break.
>
> Once this is operational it will be interesting to see how the two signals
> compare - so please check it out.
>
> Bill
>
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Lowfer
mailing list