[Lowfer] Great seeing MW on 185.3 again

Bill Ashlock ashlockw at hotmail.com
Sat Dec 4 12:22:18 EST 2010


Dick,

Yes it's Wm, as I call it (IE: An abbreviation of William.....lower case "W" followed by an upper case "m"). If I don't properly reset that exciter it comes out in the reverse or Mw and a short power interruption sometimes reverses it. I plan to rewire one of the two digital counters in the circuit so that it gets reset after every full character word but ..... so far I haven't had the time to do this.

I'm headed out in a minute to attack the Andover Loop. I had to re-install this one last week because the #10 wire wore through where it passed over a limb and broke after less than a year. Can't remember if its Xmtr is higher or lower in freq than Wm. Hope it doesn't klober my under-line friend SIW :)

Bill

> From: wa3usg at verizon.net
> To: lowfer at mailman.qth.net
> Date: Sat, 4 Dec 2010 08:41:35 -0500
> Subject: Re: [Lowfer] Great seeing MW on 185.3 again
> 
> Bill,
>     It's WM I think. However, you could read it the other way I guess. I'll
> put in a link to a capture. Looks like you are right above "SIW" who I
> believe is on 185.2993. I never really had all of my stuff calibrated to a
> greater then 1 Hz accuracy.
> 
> 	http://mysite.verizon.net/wa3usg/WM.jpg
> 
> 73
> Dick, WA3USG
> Mechanicsburg, PA.
> FN10LE
> 
> -----Original Message-----
> From: lowfer-bounces at mailman.qth.net
> [mailto:lowfer-bounces at mailman.qth.net]On Behalf Of Bill Ashlock
> Sent: Friday, December 03, 2010 11:45 PM
> To: lowfer at mailman.qth.net
> Subject: Re: [Lowfer] Great seeing MW on 185.3 again
> 
> 
> 
> Thanks for the report Dick. I have been struggling all day to get that
> Ellsworth setup back on the air and your report is the first indication that
> everything is working. (BTW, is that MW or WM?) Found all kinds of problems
> like multiple breaks in the power cable running out to the final and a blown
> fuse in the exciter in the shack.... but the loop and the final were OK
> after 6 months of inactivity. Can you or anyone else give me a readout of
> the exact frequency?
> 
> I'm back in Andover right now and tomorrow I should be able to get the
> competing Andover WM beacon back on the air, as well. So stay tuned.
> 
> Thanks again...
> 
> Bill
> 
> > From: wa3usg at verizon.net
> > To: lowfer at mailman.qth.net
> > Date: Fri, 3 Dec 2010 23:01:06 -0500
> > Subject: [Lowfer] Great seeing MW on 185.3 again
> >
> >
> > ______________________________________________________________
> > Lowfer mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Lowfer at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
 		 	   		  


More information about the Lowfer mailing list