[Lowfer] " XR " transmitting in JASON mode tonite

[lloyd chastant]

Andy I have monitored several of the WSPR xmissions and took alook at
the Jason tonite and I have not seen any sign of
any signal thus far on both modes..May be the band condx but no copy
yet on either..will monitor a bit more tonite on Jason
de Lloyd W3NF FM19

On Fri, Apr 30, 2010 at 12:26 AM, Andy - KU4XR <ku4xr at yahoo.com> wrote:
> WSPR isn't going to make it to anybody, so I'm going to experiment
> some with JASON. I'm sending " XR " only in slow mode. If you have
> JASON software, and want to try looking; here's the setup.
> JASON Options menu; choose center frequencies, and set the receive
> frequency at 1500.00000 Hz... Then is the Speed menu, choose " slow "
> Leave your dial at 184.000 - USB, set JASON in receive and see if
> anything shows up.
>
>
>
> Andy - KU4XR - EM75xr - Friendsville, TN. USA
> LOWfer Beacon " XR " @ 185.29875 KHz ( QRSS-60 )
> Coordinates:  N:  35º 43' 54" - W:  84º 3' 16"
> http://www.myspace.com/beaconxr
> http://webpages.charter.net/ku4xr/
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>